Narrow by location

Working Safely in Cold Weather

Safety

from Turner Insurance & Bonding

Workers exposed to extremely cold conditions are at risk of serious health problems, including hypothermia, frostbite, dehydration and muscle injuries. Frigid temperatures can also cause additional pain for those who suffer from arthritis and rheumatism. To prevent injuries and illness as a result of winter weather, it’s important to learn about the causes, symptoms and safety considerations to take so you are prepared to handle winter’s worst.

Causes of Cold Weather Injuries

According to the Occupational Safety and Health Administration (OSHA), there is no exact temperature at which the environment becomes hazardous. Instead, factors such as low temperatures, wind speed and wetness contribute to cold-induced injuries and illness.

  • Exposed skin freezes within one minute at -20° F when the wind speed is five miles per hour (mph), and will freeze at 10° F if the wind speed is 20 mph.
  • When skin or clothing is wet, injury or illness can occur in temperatures above 10° F, and even above freezing (32° F).
  • When the body is unable to warm itself, hypothermia and frostbite can set in, resulting in permanent tissue damage and even death.

Signs of Injury and Illness

If you or a co-worker have any of the following symptoms, get indoors and alert your supervisor or call for medical attention if they do not subside:

  • Uncontrollable shivering
  • Slurred speech
  • Clumsy movements
  • Fatigue
  • Confused behavior
  • White or grayish-yellow area(s) of the skin
  • Skin that feels “waxy”
  • Numbness

It’s important to note that many people suffering from the warning signs of frostbite do not notice because the tissue is numb. Therefore, it is wise for employees to check on each other periodically.

 

Safety Considerations

To reduce the risk of cold-induced injuries:

  • Layer clothing to keep warm enough to be safe, but cool enough to avoid perspiring excessively. It should also contain the following:
  • Inner layer – a synthetic weave to keep perspiration away from the body
  • Middle layer – wool or synthetic fabric to absorb sweat and retain body heat.
  • Outer layer – material designed to break the wind and allow for ventilation, such as GORE-TEX®.
  • Wear a hat. Almost 40 percent of your body heat escapes from your head. If you wear a hard hat, add a winter liner that covers your neck.
  • Place heat packets in gloves, vests, boots and hats to add heat to the body.
  • Watch out for the effects of cold temperatures on common body functions, such as:
  • Reduced dexterity and hand usage
  • Cold tool handles reducing your grip force
  • The skin’s reduced ability to feel pain in cold temperatures
  • Reduced muscle power and time to exhaustion

Recap of the Pending ANSI/CSA Standards for Aerial Lifts

By Scott Owyen, Construction Executive EVERYTHING IS CHANGING FOR CONTRACTORS ANSI (United States) and CSA (Canada) standards have,... »

An Inside Job: Use Indoor Construction Cameras to Monitor Workflow and Safety

By Ken Pittman, Construction Executive Managing jobsites can be challenging enough, but once interior work begins and crews... »

Drug/Alcohol Test Standards for CMV Drivers

from Turner Insurance & Bonding According to the U.S. Department of Transportation, professional drivers and others behind the... »

Medical Marijuana and the DOT: Understanding the Guidelines

from Turner Insurance & Bonding Twenty eight states and the District of Columbia have legislation legalizing the use... »

LEAVE YOUR COMMENT

Your email address will not be published. Required fields are marked *